Space and Durability
A general purpose high cube dry freight van body, with added space as the primary advantage of the Fiberglass Reinforced Plywood construction. The absence of exterior seams and rivets provides an ideal surface for custom decals and painting. FRP is also very durable and dent resistant. Our FRP bodies utilize the same quality construction of our aluminum bodies including DuraPlate® swing doors and stainless steel bar lock hardware.
Stainless Steel Rear Frame
A 12 gauge stainless steel rear frame comes standard on all truck bodies. All corners are internally reinforced for strength, as well as externally gusseted at the top corners. This frame will look good throughout the life of the body. No need to worry about chipping paint or corrosion.
One Of A Kind Roof
Our unique two-piece roof-rail design not only increases strength, it also means the roof can be easily replaced (if damaged) without disturbing the sidewall structure. Durable, aluminum castings on each corner increase strength while front “zephyr” improves aerodynamics.
LED Clearance Lights
Brighter, longer lasting LED clearance lights are standard and are FMVSS-108 compliant. LED tail lights are also standard with the recessed taillight option.
DuraPlate Swing Doors
Our swing doors are an industry benchmark. We custom build each door using 13mm thick DuraPlate panels solely for toughness and durability. Stainless steel bar lock hardware, aluminum hinges, and replaceable stainless steel pins are then installed creating an extremely strong door that’s corrosion resistant.
Corrosion Resistant Hardware
The swing doors are not the only part of the truck body with corrosion resistant hardware; all of the exterior is assembled with aluminum or stainless hardware. The extruded aluminum rub rails and secured using stainless steel bolts and
Domestic Hardwood Floors
We use only 1-1/8” or thicker laminated domestic hardwood, which run the full length of the body, to ensure durability. No need to worry about delamination or warping down the road.
Understructure & Undercoating
To protect from the harsh environment, the underside is coated with a durable weatherproof undercoating once the body is installed to seal the interior. Steel wheel pans are standard over wheel area unless the body is going on a tandem axle chassis.
For tandem axle trucks, we increase the strength of the body with the following package:
- Fully boxed 10 Ga. stainless steel rear frame
- Additional cross members from axles to back of the body
- Front and side angle or scuff welded to crossmembers
- 4″ tube longsills
- Heavier crossmembers
- Full width crossmembers instead of wheel cutouts